Wooden Artist Brush Handles -- Turned to Your Spec
Full range of handle blanks for watercolor, acrylic, and oil brushes. Precision-turned to ±0.3mm tolerance. Verify ferrule specs before sampling to ensure seamless assembly.
Find Your Handle
Select your specification method to get started
By Brush Type
Short handle (watercolor/acrylic, 15-20cm) vs. long handle (oil/studio, 28-32cm)
By Ferrule Interface
Crimped seamless ferrule, nickel/brass, taper angle and tip diameter matching
By Wood & Finish
Birch, beech, poplar; raw, sealed, dipped lacquer, multi-coat gloss
Not Sure How to Spec?
Step-by-step guide for sending us your sample or drawing
Standard Handle Profiles
Contact us for detailed specifications and custom modifications
Artist brush Handle-3
18-22cm, birch, single-dip lacquer
How to Spec Before Sampling
Provide these critical dimensions for accurate pre-production samples
Ferrule Interface
- Tip diameter (mm)
- Taper angle (degrees)
- Crimp depth (mm)
- Ferrule material (nickel/brass)
Key Dimensions
- Total length (cm)
- Max diameter (mm)
- Balance point (from tip)
- Weight target (grams)
What to Send Us
- Technical drawing (preferred)
- Physical sample (via courier)
- Photos with caliper measurements
- Target brush series name
Quick Reference Table
| What to Check | Where to Measure | Standard Range |
|---|---|---|
| Tip Diameter | Narrowest point where ferrule crimps | 4-12mm (varies by brush size) |
| Taper Angle | Angle from tip to max diameter section | 3-8° (seamless ferrule fit) |
| Total Length | Tip to end of handle | Short: 15-20cm / Long: 28-32cm |
| Max Diameter | Thickest point of handle body | 8-14mm (ergonomic grip zone) |
| Balance Point | Distance from tip where handle balances | 40-60% of total length |
3-Step Sampling Process
From initial spec to production-ready samples in 10-15 days
Send Drawing/Sample/Photos
Submit your technical drawing, physical sample, or detailed photos with caliper measurements. Our engineering team reviews for manufacturability.
We identify any design constraints, suggest optimizations, and confirm feasibility before proceeding.
Pre-Production Samples
We produce samples in your chosen wood species and finish. Each sample undergoes dimensional inspection to verify ±0.3mm tolerance compliance.
Shipped via DHL/FedEx with inspection report and material certificates.
Approve & Begin Production
Once you approve samples, we confirm QC standards (AQL level, inspection report format) and initiate mass production with 30-day lead time.
Full traceability from raw material to finished goods, with per-shipment inspection reports.
Finish Comparison
Choose the surface treatment that matches your brand positioning and budget
Raw/Sanded Blank
- Natural wood grain visible
- Finish in-house for full control
- Lowest cost option
- MOQ: 5000 units
Sealed Primer Only
- Moisture-sealed, ready for topcoat
- Excellent paint adhesion for logo printing
- Slight cost increase vs. raw
- MOQ: 5,000 units
Single-Dip Lacquer
- Satin finish, moderate sheen
- Basic protection from moisture
- Mid-tier cost positioning
- MOQ: 5,000 units
Multi-Coat Gloss Lacquer
- High-gloss mirror finish
- Premium appearance, superior durability
- Higher cost (3-5 coats + polishing)
- MOQ: 5,000 units
Stained + Clear Coat
- Enhanced wood grain depth
- Color customization (walnut, cherry, ebony tones)
- Moderate cost increase
- MOQ: 5,000 units
Water-Based Low-VOC Finish
- Eco-friendly, EU compliant
- Suitable for children's art products
- Slightly higher cost than solvent-based
- MOQ: 5,000 units
Custom Pantone Color Matching Available
We can match any Pantone color for sealed primer or lacquer finishes. Provide your target color code and we'll send a color chip for approval before production. Minimum order quantity applies for custom colors.
Quality & Compliance
Certified processes and documentation for global supply chain confidence
Per-Shipment Inspection Reports
Every production batch undergoes dimensional inspection, surface quality checks, and moisture content testing. Full inspection reports provided with each shipment.
- Dimensional tolerance verification (±0.3mm)
- Surface finish quality assessment
- AQL sampling plan documentation
Moisture Content Control
All wood is kiln-dried and stabilized to 8-12% moisture content before machining, preventing warping or cracking after assembly.
- Kiln-drying to target moisture range
- Moisture meter testing per batch
- Climate-controlled storage before shipping
FSC Chain of Custody Documentation
FSC® C123456 certified. We provide FSC certificates and transaction documentation for every shipment requiring certified wood.
- FSC Mix or FSC 100% options available
- Transaction certificates for each order
- Supplier verification and audit trail
EUDR Plot-Level GPS Traceability
Ahead of the December 30, 2026 enforcement deadline, we provide geolocation data for all wood sources, ensuring compliance with EU Deforestation Regulation.
- GPS coordinates for harvest plots
- Due diligence statements per shipment
- Supplier legality verification
Packaging Options
Bulk Carton
Standard export cartons with foam dividers. Lowest cost, suitable for high-volume assembly lines.
Layer-Separated
Individual layer trays with protective film. Prevents surface damage for high-gloss finishes.
B2B FAQ
Answers to procurement and technical questions
What is the minimum order quantity for custom shapes?
MOQ varies by complexity and finish:
- Standard profiles (raw/sealed): 5000 units per SKU
- Custom shapes (new tooling required): 5,000 units per SKU
- Multi-coat gloss finishes: 5,000 units per SKU
- Custom Pantone colors: 5,000 units per color
We offer flexible pilot runs for new product launches. Contact us to discuss your volume requirements.
What are sample costs and timeline?
Sample Costs:
- Standard profiles: $50-$100 USD (5-10 pieces)
- Custom shapes (new tooling): $200-$500 USD (includes setup)
- Shipping via DHL/FedEx: actual cost (typically $30-$60)
Timeline:
- DFM feedback: 48 hours after receiving your spec
- Sample production: 10-15 days
- Shipping: 3-5 days (express courier)
Sample costs are refundable upon first production order (minimum 5,000 units).
Can you match our existing supplier's handle exactly?
Yes, we specialize in reverse engineering and supplier migration. Send us a physical sample or detailed photos with caliper measurements, and we'll:
- Measure all critical dimensions (±0.1mm precision)
- Identify wood species and finish type
- Provide DFM feedback on any design constraints
- Produce pre-production samples for side-by-side comparison
We guarantee dimensional match within ±0.3mm tolerance. If the finish or wood species differs slightly, we'll work with you to achieve the closest possible match.
Typical turnaround: 2-3 weeks from receiving your sample to delivering matched samples.
Birch vs. beech: what's the difference in cost and performance?
Birch:
- Lighter color, fine grain
- Slightly softer (easier to turn, lower tool wear)
- Cost: baseline (reference price)
- Best for: high-gloss finishes, painted handles
Beech:
- Warmer tone, more pronounced grain
- Harder and denser (more durable, better for staining)
- Cost: +8-12% vs. birch
- Best for: natural/stained finishes, premium brush lines
Poplar is also available as a cost-effective alternative (-15% vs. birch), but it's softer and less suitable for high-wear applications.
Do you offer logo printing or laser engraving?
Yes, we offer both decoration methods:
Pad Printing (Logo/Text):
- 1-4 color options
- Best on sealed or lacquered finishes
- Setup cost: $150-$300 per design
- MOQ: 5,000 units per color
Laser Engraving:
- High-contrast burn mark on raw or stained wood
- Ideal for serial numbers, batch codes, or simple logos
- Setup cost: $100 per design
- MOQ: 5,000 units
We can also apply your logo via hot stamping (metallic foil) for premium brush lines. Contact us for a quote.
What EUDR documentation do you provide?
We provide full EUDR compliance documentation for all shipments to the EU (required from December 30, 2026):
- GPS coordinates: Plot-level geolocation for all wood sources
- Due diligence statement: Confirmation that wood is deforestation-free and legally harvested
- Supplier verification: Chain of custody from forest to factory
- Risk assessment: Country and region risk classification
All documentation is provided digitally with each shipment. We also maintain records for 5 years as required by EUDR.
Our FSC certification and existing traceability systems ensure seamless EUDR compliance.
What are your payment terms and Incoterms?
Payment Terms:
- New customers: 30% deposit, 70% before shipment (T/T)
- Established partners (after 3 orders): 100% before shipment (T/T)
Incoterms:
- FOB Qingdao: Standard (you arrange shipping)
- CIF/CFR: Available upon request
- DDP: Available for EU/US (we handle customs and delivery)
We work with major freight forwarders and can recommend logistics partners if needed.
What is the lead time for repeat orders?
Standard Lead Times (after sample approval):
- First production order: 30 days (includes tooling setup and QC validation)
- Repeat orders (same spec): 20-25 days
- Rush orders: 15 days (subject to capacity, +15% surcharge)
Factors that affect lead time:
- Wood species availability (beech may add 3-5 days)
- Multi-coat finishes (add 5-7 days for curing)
- Custom Pantone colors (add 3-5 days for color matching)
- Peak season (Oct-Dec may add 5-10 days)
We recommend placing orders 6-8 weeks before your target delivery date to allow for production, QC, and shipping.
Ready to Start Your Project?
Submit your spec for a quote, browse all components, or contact us directly
Submit Spec for Quote
Browse All Components
Explore our full range of wooden handles, caps, and packaging components
View Catalog